EIFS Exterior Wall Adhesives
Additive solutions with technical support for optimizing EIFS/ETICS adhesives.
Understanding EIFS Adhesive Performance
EIFS adhesive is a cement-based adhesive mortar that is used to adhere the back side of insulation boards to the substrate. In some External Insulation and Finish Systems (EIFS/ETICS), the same mortar can also be used to apply over the insulation board to embed reinforcing mesh.
Therefore, the durable bonding strength is significant in EIFS adhesives. Adequate working time, smooth application and water control are also essential. Cemotech focuses on supplying chemical additives for dry-mix mortar systems. We can offer solutions to help you optimize EIFS adhesive performance.
Our Formulations for EIFS Wall Adhesives
- For insufficient bonding, we designed a series of RDPs to suit different EIFS adhesives, helping you improve adhesion and flexibility effectively between different insulation boards and the substrate.
- For poor application, wecombine superplasticizers with RDP to help balance water demand, mortar spread and bonding performance.
- For excessive foam problems, our powder defoamer can not only remove bubbles but also provide a long-term antifoaming effect.
- For moisture challenges, we use water repellents with RDP to balance adhesion and resistance to capillary water uptake.
Benefits of Cemotech Chemicals in EIFS Adhesive
As a reliable solution provider in the construction industry, Cemotech is dedicated to developing market-winning products to meet market demands.
Vinabond® Redispersible Polymer Powder
Vinabond RDP can enhance critical adhesion, cohesion, flexibility, and workability properties. Ranging from different levels of rigidity and flexibility, you can always find the right grade for your different batches of adhesive mortars.
Aquago® Hydrophobing Agent
Our Aquago® WP200H owns obvious advantages on water repellent comparing other competitive products. We also designed economical and highly effective grades for your different needs in EIFS adhesive and other mortars.
Ultraplast® Superplasticizer
Ultraplast® superplasticizers can meet challenging requirements in your EIFS adhesive mortar with a high water-reduction effect. They can provide high fluidity, easy defoaming, high strength and durable stability according to your grade selection.
Foamsolver® Antifoaming Agent
Foamsolver® has high compatibility with a wide range of cementitious systems, you can solve foam issues in your EIFS adhesive without surface defect risks. It can anti-foam for a long time during mixing and application.
Formulation Tips for EIFS Wall Adhesives
Cemotech is more than a chemical supplier, but has years of experience providing full solutions with additive combinations. We’d like to share some tips on EIFS adhesive formulations:

Match the Formulation to the Insulation Board
Select additives based on your insulation material since EPS or mineral wool boards differ in surface characteristics, stiffness and adhesive requirements.

Balance Open Time and Setting Behavior
Evaluate the influence of cement type, additive dosage and ambient temperature on workable time and setting behavior to avoid premature stiffening or delayed hardening.

Test Under Actual Application Conditions
Mixing procedures and site conditions can affect final performance. Test the formulation under actual conditions to double-check performance.
FAQ
You can check whether you added too much cellulose ether or used insufficient water, and consider the interactions between additives and cements.
It may have some influence if the dosage and grade are not suitable.
Cellulose ether is generally the primary additive for optimizing open time, but RDP is also important in drymix mortar and we suggest you use both.
Of Course, we specialize in offering additive combinations for different dry-mix mortars.
Cemotech also provides technical training and develops innovative chemical solutions to meet evolving market needs.