VINABOND®️ N510
Product Description
VINABOND® N510 is a copolymer powder of vinyl acetate and ethylene and is dispersible in water. Drymix Mortar modified with VINBOND® N510 exhibit improved adhesion, flexural strength in bending, deformability, abrasion resistance and are easier to process. Leveling, thixotropy and water retention are essentially unaffected. The product is ideal for use in combination with other mortar additives intended to enhance specific properties.
VINABOND® N510 contains a fine mineral filler as an anti-blocking agent. It is produced without the addition of organic solvents, plasticizers and film- forming agents.
Application Methods
For the production of ready-mixed dry mortars, such as adhesives and troweling compounds, blend VINABOND® N510 with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate and lead to the formation of small lumps of resin. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.
| Product Specification | |||
|---|---|---|---|
| Constitution: | Vac/e | Solid content | 98-100% |
| Appearance: | White powder | Bulk density: | 400-600kg/m³ |
| Protective colloid: | Polyvinyl alcohol | Ash content: | 25±2%. |
| Average particle size: | 60-100µm | PH value: | 6-9 |
| Minimum film forming temperature: | 0℃ | TG temperature: | 8℃ |
| The testing method refers to 《GB/T 29594-2013可再分散乳胶(Redispersible Polymer powders)》 as per Chinese National Standards General Information Celotech’s Redispersible Polymer Powder (RDP) is a versatile polymeric binder engineered to enhance performance in tile adhesives, skim coats, and plaster/render applications, delivering: ✔ Superior Adhesion Strength – Improves bond strength by up to 40% (EN 12004 compliant) Key Applications:
Note: Performance data is based on internal testing and standard formulation guidelines. Actual performance may vary depending on binder dosage, raw material compatibility, formulation design, and jobsite conditions. Compatibility with industry standards is achievable when used correctly in a properly balanced system. Disclaimer: Mentions of EN and ASTM standards are for reference purposes only. Celotech’s RDP is designed to support the development of products that meet or exceed these standard requirements when properly formulated and tested by end users. Celotech does not guarantee direct compliance or certification of final products unless validated through independent testing. Users are responsible for verifying suitability for their specific application and regulatory requirements. | |||
