High-performance Construction Chemical Additives Manufacturer & Supplier
Skip image slider

Vinabond® N510

Vinabond® N510 is a hard dispersible polymerpowder based on vinyl acetate and ethylene forvery good tensile adhesion strength on inorganicsurfaces combined with good workability.

SPECIAL FEATURES

VINABOND® N511 is a hard general-purpose powder and has no effect on rheological properties.It is eminently suitable for formulating compounds of high ultimate strength and low emissions.

PRODUCT SPECIFICATION

Property Value
Constitution Vac/E
Appearance White powder
Protective colloid Polyvinyl alcohol
Average particle size 70-100 µm

 

Specification Value
Solid content 98-100%
Bulk density 400-600 kg/m³
Ash content 25±2%
PH value 6-9
Glass temperature (Tg): 5-8

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. The quality of our products is guaranteed under our General Conditions of Sale.

 

APPLICATION METHODS

For the production of powder products such as dry mortars, adhesives or troweling compounds,VINABOND® N510 is mixed with the other dry materials in suitable equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the thermoplastic redispersible powder could agglomerate,resulting in the formation of small lumps of resin.

After sufficient water has been added, mortars or troweling compounds can be mixed by hand or machine. Since mixing by hand only generates low shear forces, it is best to allow the mixture to mature by leaving it to stand for 5 minutes, and then to stir it again. This is usually unnecessary where forced-circulation mixers are employed.

RECOMMENDED APPLICATION

For typical application fields of Vinabond® N510 you can refer to the application table. Please discuss additional applications with your customer representative.

Application Recommendation Suitability
Tile adhesive C1 Tile adhesive

C2 Tile adhesive

Special tile adhesive

●

〇

〇

Tile Grouts Standard

Hydrophobic

Flexible

●

〇

〇

Plasters/

Renders

Thin layered decorative renders

Thick layered renderes/plasters

Special renders/plasters

〇

〇

〇

Walltrowelling compound Skim Coat

Joint Fillers

●

〇

  • highly recommended〇 recommended

PACKAGE

  • 25 kg paper bags.
  • Big Bags available upon request.

STORAGE

Vinabond® N510 should be stored in a cool place and protected against moisture. Since the product is thermoplastic, it should not be subjected to pressure or high temperatures during storage because of the risk of caking. Storage time should not exceed 6 months from receipt of delivery. Blends with hydraulic binders, fillers and pigments show better storage stability because these components help to prevent caking. However, blends of this type still have to be protected against moisture.

VALID PERIOD

Valid for one year. Out of this valid period, if not agglomerated, this product can still be usable.

SAFETY NOTES

Comprehensive instructions are given in the corresponding Material Safety Data Sheets.

Products Categories
Get A Free Quote
Contact Form Demo (#3)

Related Products

Related News

In the classification of chemical raw materials and the research and development of related products, redispersible polymer powder (RDP) and copolymer […]

Introduction In tile adhesives, redispersible polymer powder (RDP) serves as a key modifying agent for enhancing physical performance. Whether used in […]

What Is the Glass Transition Temperature? The glass-transition temperature refers to the temperature at which polymers are converted from an […]

Introduction Redispersible polymer powders (RDP) are polymer emulsions that have been converted by a series of processes such as high […]

Scroll to Top

Get A Free Quote Now !

Contact Form Demo (#3)
If you have any questions, please do not hesitate to contatct with us.