


Vinabond® N511
Vinabond® N511 is a hard dispersible polymerpowder based on vinyl acetate and ethylene forvery good tensile adhesion strength on inorganicsurfaces combined with good workability.
SPECIAL FEATURES
VinabondR N511 is a hard general-purpose powder and has no effect on rheological properties. It is eminently suitable for formulating compounds of high ultimate strength and low emissions.
PRODUCT SPECIFICATION
| Property | Value |
| Constitution | Vac/E |
| Appearance | White powder |
| Protective colloid | Polyvinyl alcohol |
| Average particle size | 60-100 µm |
| Specification | Value |
| Solid content | 98-100% |
| Bulk density | 400-600 kg/m³ |
| Ash content | 13-17% |
| PH value | 6-9 |
| Glass temperature (Tg): | 5-8 |
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. The quality of our products is guaranteed under our General Conditions of Sale.
APPLICATION METHODS
For the production of ready-mixed dry mortars, such as adhesives and troweling compounds, blend Vinabond® N511 with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate and lead to the formation of small lumps of resin. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.
RECOMMENDED APPLICATION
For typical application fields of Vinabond® N511 you can refer to the application table. Please discuss additional applications with your customer representative.
| Application | Recommendation | Suitability |
| Tile adhesive | C1 Tile adhesive
C2 Tile adhesive Special tile adhesive |
●
● ● |
| Tile Grouts | Standard
Hydrophobic Flexible |
●
● ● |
| ETICS | Adhesive mortars
Top Coat |
●
〇 |
| Walltrowelling compound | Skim Coat
Joint Fillers |
〇
● |
- highly recommended〇 recommended
PACKAGE
- 25 kg paper bags.
- Big Bags available upon request.
STORAGE
Vinabond® N511 should be stored in a cool place and protected against moisture. Since the product is thermoplastic, it should not be subjected to pressure or high temperatures during storage because of the risk of caking. Storage time should not exceed 6 months from receipt of delivery. Blends with hydraulic binders, fillers and pigments show better storage stability because these components help to prevent caking. However, blends of this type still have to be protected against moisture.
VALID PERIOD
Valid for one year. Out of this valid period, if not agglomerated, this product can still be usable.
SAFETY NOTES
Comprehensive instructions are given in the corresponding Material Safety Data Sheets.
Related News
In the classification of chemical raw materials and the research and development of related products, redispersible polymer powder (RDP) and copolymer […]
How Does Redispersible Polymer Powder Alter the Internal Structure of Mortar? Once redispersible polymer powder is added to cement mortar, […]
Introduction In the modern dry-mix mortar industry, research in construction chemistry has long established that the mechanism of redispersible polymer […]
Ask any dry-mix formulator why a batch of tile adhesive passed every lab test in July, only to fail on […]
Definition and Composition The redispersible polymer powder is a special water-based emulsion made by spray drying and a polymer binder […]
Introduction Redispersible polymer powders (RDP) are polymer emulsions that have been converted by a series of processes such as high […]