


Vinabond® X753
Vinabond® X753 is a hard dispersible powder based on vinyl acetate,acrylic and VeoVa with very good tensile adhesion strength on inorganic surfaces combined with good workability.
SPECIAL FEATURES
Vinabond® X753 is a hard general-purpose powder and has no effect on rheological properties. It is eminently suitable for formulating compounds of high ultimate strength and low emissions.
PRODUCT SPECIFICATION
| Property | Value |
| Constitution | Vac/A/VeoVa |
| Appearance | White powder |
| Protective colloid | Polyvinyl alcohol |
| Average particle size | 60-100 µm |
| Minimumfilmformingtemperature: | 11℃ |
| Specification | Value |
| Solid content | 98-100% |
| Bulk density | 400-600 kg/m³ |
| Ash content | 16±2% |
| PH value | 6-9 |
| Tg temperature | 25℃ |
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. The quality of our products is guaranteed under our General Conditions of Sale.
APPLICATION METHODS
For the production of ready-mixed dry mortars, such as adhesives and troweling compounds, blend Vinabond® X753 with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate and lead to the formation of small lumps of resin. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.
RECOMMENDED APPLICATION
For typical application fields of Vinabond® X753 you can refer to the application table. Please discuss additional applications with your customer representative.
| Application | Recommendation | Suitability |
| Tile adhesive | C1 Tile adhesive
C2 Tile adhesive Special tile adhesive |
●
● 〇 |
| Tile Grouts | Standard
Hydrophobic Flexible |
●
● 〇 |
| ETICS | Adhesive mortars
Top Coat |
●
〇 |
| Walltrowelling compound | Skim Coat
Joint Fillers |
●
〇 |
- highly recommended〇 recommended
PACKAGE
- 25 kg paper bags.
- Big Bags available upon request.
STORAGE
Vinabond® X753 should be stored in a cool place and protected against moisture. Since the product is thermoplastic, it should not be subjected to pressure or high temperatures during storage because of the risk of caking. Storage time should not exceed 6 months from receipt of delivery. Blends with hydraulic binders, fillers and pigments show better storage stability because these components help to prevent caking. However, blends of this type still have to be protected against moisture.
VALID PERIOD
Valid for one year. Out of this valid period, if not agglomerated, this product can still be usable.
SAFETY NOTES
Comprehensive instructions are given in the corresponding Material Safety Data Sheets.
Related News
How Does Redispersible Polymer Powder Alter the Internal Structure of Mortar? Once redispersible polymer powder is added to cement mortar, […]
Definition and Composition The redispersible polymer powder is a special water-based emulsion made by spray drying and a polymer binder […]
What Is the Glass Transition Temperature? The glass-transition temperature refers to the temperature at which polymers are converted from an […]