+86 512 62896370 ☎

  • Home
  • Products 
    • Overview
    • Redispersible Powder
    • Superplasticizers
    • Gypsum Retarder
    • Modified Starch
    • Powder Defoamer
    • Calcium Formate
  • Cemotech
  • News
  • Contact
  • …  
    • Home
    • Products 
      • Overview
      • Redispersible Powder
      • Superplasticizers
      • Gypsum Retarder
      • Modified Starch
      • Powder Defoamer
      • Calcium Formate
    • Cemotech
    • News
    • Contact
  •  
    • Email

      +86 512 62896370 ☎

      • Home
      • Products 
        • Overview
        • Redispersible Powder
        • Superplasticizers
        • Gypsum Retarder
        • Modified Starch
        • Powder Defoamer
        • Calcium Formate
      • Cemotech
      • News
      • Contact
      • …  
        • Home
        • Products 
          • Overview
          • Redispersible Powder
          • Superplasticizers
          • Gypsum Retarder
          • Modified Starch
          • Powder Defoamer
          • Calcium Formate
        • Cemotech
        • News
        • Contact
    •  
      • Email

        How to choose the sand used for building mortar?

        The aggregates in the mortar are inert materials not involved in the chemical reaction, and play the role of framework or padding. Aggregates can be used to adjust the density of mortar and control the shrinkage performance of materials. The particle diameter of fine aggregate used in the mortar is generally less than 5mm, so it must be sieved and the maximum particle diameter should go through the sieve pore of 5mm. The finer the sand is, the larger the total surface area will be, and the more the slurry wrapped on its surface will be. When the consistency of the mortar mixture is the same, the mortar prepared by fine sand requires more slurry than that prepared by coarse sand. Since the water consumption increases and the mortar strength will fall accordingly, the use of medium, coarse sand is preferred for the preparation of building mortar. But it also needs to be selected according to the uses, application positions and substrates of mortar. For example, for masonry mortar, in the brick masonry, medium sand should be adopted; while in the rubble masonry, since the surface of rubble is more angular and rough, coarse sand should be used. For plastering mortar, the fineness modulus of sand should not be less than 2.4.

         

        ABOUT CEMOTECH

        → Suzhou Cemo New Material Technology Co.,Ltd is a high-tech enterprise specialized in construction additives.

        → Estabilished in 2011 and expanded production scale in 2015.

        → Our production capacity is 10,000 tons of redispersible polymer powder, 5000 tons of polycarboxylic acid superplasticizer, 3000 tons of melamine superplasticizer, 2000 tons of defoamer, gypsum retarder, hydrophobic agent and other additives.

        Subscribe
        Previous
        Differences between hydroxypropyl starch and...
        Next
        What's the effect of addition of lime
         Return to site
        All Posts
        ×

        Almost done…

        We just sent you an email. Please click the link in the email to confirm your subscription!

        OK